How to Replace a Bathroom Faucet

There are few things more annoying than a leaky bathroom faucet. It can substantially increase your water bill, result in water damage, not to mention the obnoxious dripping sound. You need to first determine if thelavatory faucetmust be repaired or replaced. If you don't knowhow to replace a bathroom faucet, follow this guide. It's a fairly easy project, as far as DIY home improvement jobs go, and can get all the info, parts, and tools you need right here at PlumbersStock.

First, you mustfind a compatible replacement faucet. Make sure the configuration matches your installation. When picking out a faucet, you will need to decide on thecolor and finish, what type and how manyfaucet handles, as well as how the unit will mount to your wall or sink. Let your old faucet help guide the style choice to better ensure that the new one matches yourshower faucet.

Replacing a Bathroom Faucet

This step is pretty straightforward. Before unscrewing anything, you will need to turn off the hot and cold water valves to keep from getting water everywhere. Once you have completely cut off yourfaucet supply lines, you can then begin disassembling your faucet. Remove your faucet from the supply lines, unscrew the metal rim around the drain and then clean all the holes with rubbing alcohol. Once you have all your tools and parts in order, you are ready for installation. We recommend reading through all the instructions before beginning the install.

Installing Your New Lavatory Faucet

The spout——根据水龙头,你本月的类型alling, it is smart to begin with the spout first. A single handle lavatory faucet differs in both design and installation from a two-handle faucet. The single handle faucet will mount in a single-hole sink with the water control valve included in the full installation. A two-handle design will have a separate valve in each handle. The spout will sit flush with the top of the sink, and once placed the “secure ring” will need to be screwed on and tighten from beneath the deck (sink). Don’t forget to screw on the three-way spout tee if installing a two handle lavatory faucet. NOTE: A parts diagram should be included in the manual for reference purposes.
Installing hot and cold valves- If you are installing a faucet that has separate handles (two-handle design) for hot and cold, you will need to install a valve for each. Place the new valve (contained within the handle) in the location designed for it and then go underneath the sink and tighten it into place. Repeat the same step for the other side.
一个ttach water lines to hot and cold valves- Once you get your new hot and cold valves installed into place you will then need to attach the water lines to the appropriate spot. Make sure you are connecting the right lines where they are supposed to go. You may want to take pictures of the installation when disassembling your old faucet so you know how to put it back correctly.

Once everything is back in place your faucet should be working flawlessly. Remember that almost every faucet comes with an instruction manual to aid you. Not every faucet is installed exactly the same, and depending on the type of faucet you are working with you may need to tweak these steps a little bit to suit your needs.

Save on Bathroom Updates

If you are updating the entire bathroom, you will want to replace everything with matching毛巾杆,light fixtures, and more. At PlumbersStock, we have a huge selection ofbathroom accessories.